Push Type Zip Ties
- Zip Ties Bulk DiscountFrom 5 Packets to 9 Packets Receive 10% per packet discountFrom 10 Packets onwards Receive 20% per packet DiscountAll discounts received at checkout
7.2mm x 155mm Toyota Black Push Type Zip Ties
7.2mm x 155mm Toyota Black Push Type Zip Ties
7.2mm x 155mm black push type zip ties, Toyota size. 100 per pack.$35.003.6mm x 150mm Push Type Zip Ties (100 Pack)
3.6mm x 150mm Push Type Zip Ties (100 Pack)
3.6mm x 150mm black push type zip ties with a push-in clip. 100 per pack.$28.004.8mm x 200mm Push Type Zip Ties (100 Pack)
4.8mm x 200mm Push Type Zip Ties (100 Pack)
4.8mm x 200mm black push type zip ties with a push-in clip. 100 per pack.$30.008mm x 150mm Holden Push Type Zip Ties (100 Pack)
8mm x 150mm Holden Push Type Zip Ties (100 Pack)
8mm x 150mm black push type zip ties, Holden size. 100 per pack.$30.00
11
Push type zip ties have a clip built into the tie. Push it into a pre-drilled or factory hole and it locks in, holding the run flat against the panel with no screw or separate mount. They are black nylon and come 100 to a pack.
Sizes
| Size | Typical use |
|---|---|
| 8 x 150mm (Holden) | Factory clip holes on Holden vehicles |
| 7.2 x 155mm (Toyota) | Factory clip holes on Toyota vehicles |
| 4.8 x 200mm | Panels, enclosures and general automotive wiring |
| 3.6 x 150mm | Lighter wiring on thin panels |
Check the hole first
The clip has to match the hole. If you are replacing factory clips, measure the hole or match the vehicle make before ordering.
No hole to clip into? Use mountable zip ties with a screw, or adhesive zip tie mounts. For chassis rails, see button head zip ties.
Common questions
Will they fit my vehicle?
The clip has to match the hole. If you are replacing factory clips, measure the hole or match the make (Holden or Toyota) before ordering.
Which sizes are there?
3.6mm x 150mm, 4.8mm x 200mm, 7.2mm x 155mm Toyota, 8mm x 150mm Holden, all in packs of 100.