Red fork terminals for 3mm wire, made to fit a 4mm stud. They slide under a screw or stud without the screw coming all the way out.
What they fit
With a 4mm stud hole, these suit jobs such as:
- switch panel and terminal block screws
- small accessory and gauge terminals
- M4 earth screws on brackets
Red 3mm wire covers light-duty circuits, such as interior and dash lighting and indicator and tail light wiring.
How to fit them
- Crimp the 3mm wire into the red barrel.
- Loosen the M4 nut or screw a few turns, slide the fork under it and tighten.
- Where vibration is heavy, use a ring terminal instead.
An M4 nut usually takes a 7mm spanner. Match the hole to the stud: a 4mm hole on a smaller stud leaves the terminal loose under the nut.
Use a ratchet crimping tool: it will not release until the crimp is complete, so every red 3mm join gets the same pressure. Where the join will see water, seal it with dual wall heat shrink.
Pick this size for an M4 stud. For an M6 stud, step up to the red 6mm.
Specifications
| Type | Fork Terminal |
| Wire size | 3mm (red) |
| Stud size | 4mm |
| Contact | Tinned copper barrel |
| Insulation | Insulated sleeve |
| Pack | 50 per pack |
| Product code | A1-fr34 |
Same stud size, other wire sizes
| Size | Colour |
|---|---|
| 4mm wire, 4mm stud | blue |
Pairs with: red ring terminals. See every type in our fork terminals and crimp terminals ranges.
Pack and pricing
Red fork terminals come 50 per pack, no minimum order. Buy 5 to 9 packets for 10% off each packet, or 10 or more for 20% off. Orders placed before 12pm are dispatched the same day.
| Product Code | A1-fr34 |
| Condition | New |
| Weight | 0.01kg |