Red female bullet terminals for 3mm wire. They take a male bullet to make a plug-and-unplug join, with the live side covered when apart. Red marks 3mm wire in our colour code, which covers light-duty circuits.
What they fit
Use them on 3mm wire for jobs such as:
- interior and dash lighting
- indicator and tail light wiring
- sensor, radio and switch leads
How to fit them
- Crimp the female onto the supply side so the exposed pin is on the load side.
- Crimp a male bullet in red to the other wire.
- Push them together until the bullet seats.
Use a ratchet crimping tool: it will not release until the crimp is complete, so every red 3mm join gets the same pressure. Where the join will see water, seal it with dual wall heat shrink.
Specifications
| Type | Female Bullet Terminal |
| Wire size | 3mm (red) |
| Contact | Tinned copper barrel |
| Insulation | Insulated sleeve |
| Pack | 50 per pack |
| Product code | A1-bf3 |
Other wire sizes
| Size | Colour |
|---|---|
| 4mm wire | blue |
Pairs with: red male bullet terminals. See every type in our female bullet terminals and crimp terminals ranges.
Pack and pricing
Red female bullet terminals come 50 per pack, no minimum order. Buy 5 to 9 packets for 10% off each packet, or 10 or more for 20% off. Orders placed before 12pm are dispatched the same day.
| Product Code | A1-bf3 |
| Condition | New |
| Weight | 0.1kg |
This field is required.
**Please note colours are ONLY an example and due to photo and screen resolution may not represent the correct colour **