Red heat shrink wire joiners for 3mm wire. They join two wires end to end, then seal the join with a heat shrink sleeve. Red marks 3mm wire in our colour code, which covers light-duty circuits.
What they fit
Use them on 3mm wire for jobs such as:
- interior and dash lighting
- indicator and tail light wiring
- sensor, radio and switch leads
How to fit them
- Strip both wire ends and push one into each side.
- Crimp both sides of the red barrel.
- Heat the sleeve evenly with a heat gun until it shrinks tight over the join.
Use a ratchet crimping tool: it will not release until the crimp is complete, so every red 3mm join gets the same pressure.
Specifications
| Type | Heat Shrink Wire Joiner |
| Wire size | 3mm (red) |
| Contact | Tinned copper barrel |
| Insulation | Heat shrink sleeve |
| Pack | 50 per pack |
| Product code | A1-hjr3 |
Other wire sizes
| Size | Colour |
|---|---|
| 4mm wire | blue |
| 5mm wire | yellow |
Pairs with: red plain wire joiners. See every type in our heat shrink wire joiners and crimp terminals ranges.
Pack and pricing
Red heat shrink wire joiners come 50 per pack, no minimum order. Buy 5 to 9 packets for 10% off each packet, or 10 or more for 20% off. Orders placed before 12pm are dispatched the same day.
| Product Code | A1-hjr3 |
| Condition | New |
| Weight | 0.01kg |
This field is required.
**Please note colours are ONLY an example and due to photo and screen resolution may not represent the correct colour **